tag:blogger.com,1999:blog-1200580631182730878.post2215622151611243725..comments2024-03-23T16:23:13.312+08:00Comments on CISCO Dreamer: MPLS BasicsPetehttp://www.blogger.com/profile/14603511201107810183noreply@blogger.comBlogger15125tag:blogger.com,1999:blog-1200580631182730878.post-40996099751068152072014-02-26T11:12:51.785+08:002014-02-26T11:12:51.785+08:00Hi,
I may need of your recommendations,
Let say...Hi, <br /><br />I may need of your recommendations,<br /><br />Let say I have this coming project,<br />multi-site branches connected to a single site hub.<br /><br />What are the considerations?,<br /><br />the only goal is inter-connecting the branches accessible to the main HQ.<br /><br />Ismaelhttps://www.blogger.com/profile/13503696355461524337noreply@blogger.comtag:blogger.com,1999:blog-1200580631182730878.post-75155769437918547272013-07-17T04:00:19.612+08:002013-07-17T04:00:19.612+08:00Seriously, these blogs rock. MANY, MANY MANY thank...Seriously, these blogs rock. MANY, MANY MANY thanks to the author. Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-1200580631182730878.post-74974660559384443492013-06-16T19:50:27.919+08:002013-06-16T19:50:27.919+08:00helpfull....helpfull....Anonymoushttps://www.blogger.com/profile/12812794691949072496noreply@blogger.comtag:blogger.com,1999:blog-1200580631182730878.post-53910419010664752142013-05-01T19:12:18.578+08:002013-05-01T19:12:18.578+08:00Thank you so much for your post....Thank you so much for your post....Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-1200580631182730878.post-47641412660169947112013-04-08T00:16:06.561+08:002013-04-08T00:16:06.561+08:00very good stuff...... From where I will get CCNA-S...very good stuff...... From where I will get CCNA-SP material???Anonymoushttps://www.blogger.com/profile/04397417684057625899noreply@blogger.comtag:blogger.com,1999:blog-1200580631182730878.post-77229392377639844182013-03-01T13:27:26.127+08:002013-03-01T13:27:26.127+08:00Nice job. It is very good for first learners of MP...Nice job. It is very good for first learners of MPLS. <br /><br />One thing is left. " ip cef" must be enabled to work MPLS. But most of the ios has been enabled by default. No need to enable manually in some ios. Anonymoushttps://www.blogger.com/profile/06514216729363276387noreply@blogger.comtag:blogger.com,1999:blog-1200580631182730878.post-91511360032160619952012-06-19T03:01:27.803+08:002012-06-19T03:01:27.803+08:00Realy great effort to expain mpls thanksRealy great effort to expain mpls thanksAnonymousnoreply@blogger.comtag:blogger.com,1999:blog-1200580631182730878.post-91277563153183378802012-03-06T16:03:32.975+08:002012-03-06T16:03:32.975+08:00Thanks a lot...Thanks a lot...Rahul Kaleeckalhttps://www.blogger.com/profile/14172694345522266987noreply@blogger.comtag:blogger.com,1999:blog-1200580631182730878.post-89700962016735292882012-01-18T07:54:48.948+08:002012-01-18T07:54:48.948+08:00Nice one! It helps. Thanks.Nice one! It helps. Thanks.Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-1200580631182730878.post-81202698494615387062011-11-19T10:18:51.006+08:002011-11-19T10:18:51.006+08:00Dear All,
It's great to mpls, do someone have...Dear All,<br /><br />It's great to mpls, do someone have any more topology.<br /><br />thanks,<br />bunthAnonymousnoreply@blogger.comtag:blogger.com,1999:blog-1200580631182730878.post-44024466976643793272011-08-31T15:50:48.723+08:002011-08-31T15:50:48.723+08:00Hey
Great post!!!!
Pls upload a post on labels....Hey <br /><br />Great post!!!!<br /><br />Pls upload a post on labels. How and when different labels are imposed, when to use them.<br />imp null, exp null, etcAnonymousnoreply@blogger.comtag:blogger.com,1999:blog-1200580631182730878.post-75372590788247049372010-03-12T14:29:25.158+08:002010-03-12T14:29:25.158+08:00Do we need to reload the router for "mpls lab...Do we need to reload the router for "mpls label range" to take effect?VEnkatnoreply@blogger.comtag:blogger.com,1999:blog-1200580631182730878.post-10723867727398041662010-02-18T02:21:06.801+08:002010-02-18T02:21:06.801+08:00thanks. it helped in a way. cheers,thanks. it helped in a way. cheers,Utkunoreply@blogger.comtag:blogger.com,1999:blog-1200580631182730878.post-72445295028639068982009-03-16T06:36:00.000+08:002009-03-16T06:36:00.000+08:00Hi Dreamer,I am having a problem with class based ...Hi Dreamer,<BR/><BR/>I am having a problem with class based tunnel selection.<BR/><BR/>i configured 3 tunnels and assigned exp values per tunnel but all traffic is flowing through the same tunnel for some reason.<BR/><BR/>for simplicity i am posting the configuration from ce and pe routers;<BR/><BR/>upgrade fpd auto<BR/>version 12.4<BR/>service timestamps debug datetime msec<BR/>service timestamps log datetime msec<BR/>no service password-encryption<BR/>!<BR/>hostname CE1<BR/>!<BR/>boot-start-marker<BR/>boot-end-marker<BR/>!<BR/>logging message-counter syslog<BR/>!<BR/>no aaa new-model<BR/>ip source-route<BR/>ip cef<BR/>!<BR/>!<BR/>!<BR/>!<BR/>no ip domain lookup<BR/>no ipv6 cef<BR/>!<BR/>multilink bundle-name authenticated<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>archive<BR/> log config<BR/> hidekeys<BR/>! <BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>class-map match-any ef<BR/> match packet length min 900 max 1000<BR/>class-map match-any af12<BR/> match packet length min 1300 max 1400<BR/>class-map match-any af13<BR/> match packet length min 1500 max 1600<BR/>class-map match-any af11<BR/> match packet length min 1100 max 1200<BR/>!<BR/>!<BR/>policy-map input<BR/> class ef<BR/> set ip dscp ef<BR/> class af11<BR/> set ip dscp af11<BR/> class af12<BR/> set ip dscp af12<BR/> class af13<BR/> set ip dscp af13<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>interface Loopback0<BR/> ip address 10.0.0.7 255.255.255.255<BR/>!<BR/>interface FastEthernet0/0<BR/> no ip address<BR/> shutdown<BR/> duplex half<BR/>!<BR/>interface FastEthernet1/0<BR/> description Connection to Client1<BR/> bandwidth 5000<BR/> ip address 192.168.153.1 255.255.255.0<BR/> duplex auto<BR/> speed auto<BR/> service-policy input input<BR/>!<BR/>interface FastEthernet1/1<BR/> description Connection to LER_PE1<BR/> bandwidth 5000<BR/> ip address 10.0.7.1 255.255.255.0<BR/> duplex auto<BR/> speed auto<BR/>!<BR/>router ospf 100<BR/> log-adjacency-changes<BR/> network 10.0.0.0 0.0.0.255 area 0<BR/> network 10.0.7.0 0.0.0.255 area 0<BR/> network 192.168.153.0 0.0.0.255 area 0<BR/>!<BR/>ip forward-protocol nd<BR/>no ip http server<BR/>no ip http secure-server<BR/>!<BR/>!<BR/>!<BR/>logging alarm informational<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>control-plane<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>gatekeeper<BR/> shutdown<BR/>!<BR/>!<BR/>line con 0<BR/> stopbits 1<BR/>line aux 0<BR/> stopbits 1<BR/>line vty 0 4<BR/> login<BR/>!<BR/>end<BR/><BR/><BR/>!<BR/>upgrade fpd auto<BR/>version 12.4<BR/>service timestamps debug datetime msec<BR/>service timestamps log datetime msec<BR/>no service password-encryption<BR/>!<BR/>hostname LER_PE1<BR/>!<BR/>boot-start-marker<BR/>boot-end-marker<BR/>!<BR/>logging message-counter syslog<BR/>no logging console<BR/>!<BR/>no aaa new-model<BR/>ip source-route<BR/>ip cef<BR/>!<BR/>!<BR/>!<BR/>!<BR/>no ip domain lookup<BR/>no ipv6 cef<BR/>!<BR/>multilink bundle-name authenticated<BR/>mpls traffic-eng tunnels<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>archive<BR/> log config<BR/> hidekeys<BR/>! <BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>class-map match-all mpls-af11<BR/> match dscp af11 <BR/>class-map match-all mpls-af13<BR/> match dscp af13 <BR/>class-map match-all mpls-af12<BR/> match dscp af12 <BR/>class-map match-all mpls-ef<BR/> match dscp ef <BR/>class-map match-all mpls-exp<BR/>!<BR/>!<BR/>policy-map mpls-exp<BR/> class mpls-ef<BR/> set mpls experimental topmost 5<BR/> class mpls-af11<BR/> set mpls experimental topmost 4<BR/> class mpls-af12<BR/> set mpls experimental topmost 3<BR/> class mpls-af13<BR/> set mpls experimental topmost 2<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>interface Loopback0<BR/> ip address 10.0.0.1 255.255.255.255<BR/>!<BR/>interface Tunnel4<BR/> ip unnumbered Loopback0<BR/> tunnel destination 10.0.0.5<BR/> tunnel mode mpls traffic-eng<BR/> tunnel mpls traffic-eng autoroute announce<BR/> tunnel mpls traffic-eng priority 2 2<BR/> tunnel mpls traffic-eng bandwidth 512<BR/> tunnel mpls traffic-eng path-option 1 dynamic<BR/> tunnel mpls traffic-eng exp 4<BR/> no routing dynamic<BR/>!<BR/>interface Tunnel5<BR/> ip unnumbered Loopback0<BR/> tunnel destination 10.0.0.5<BR/> tunnel mode mpls traffic-eng<BR/> tunnel mpls traffic-eng autoroute announce<BR/> tunnel mpls traffic-eng priority 1 1<BR/> tunnel mpls traffic-eng bandwidth 1024<BR/> tunnel mpls traffic-eng path-option 1 dynamic<BR/> tunnel mpls traffic-eng exp 5<BR/> no routing dynamic<BR/>!<BR/>interface Tunnel32<BR/> ip unnumbered Loopback0<BR/> tunnel destination 10.0.0.5<BR/> tunnel mode mpls traffic-eng<BR/> tunnel mpls traffic-eng autoroute announce<BR/> tunnel mpls traffic-eng priority 3 3<BR/> tunnel mpls traffic-eng bandwidth 512<BR/> tunnel mpls traffic-eng path-option 1 dynamic<BR/> tunnel mpls traffic-eng exp 1 2 3 6 7<BR/> no routing dynamic<BR/>!<BR/>interface FastEthernet0/0<BR/> no ip address<BR/> shutdown<BR/> duplex half<BR/>!<BR/>interface FastEthernet1/0<BR/> description Connection to LSR_P1<BR/> bandwidth 2048<BR/> ip address 10.0.3.1 255.255.255.0<BR/> duplex auto<BR/> speed auto<BR/> mpls ip<BR/> ip rsvp bandwidth 2048 2048<BR/>!<BR/>interface FastEthernet1/1<BR/> description Connection to LSR_P2<BR/> bandwidth 512<BR/> ip address 10.0.2.1 255.255.255.0<BR/> duplex auto<BR/> speed auto<BR/> mpls traffic-eng tunnels<BR/> mpls ip<BR/> ip rsvp bandwidth 512 512<BR/>!<BR/>interface FastEthernet2/0<BR/> description Connection to LSR_P3<BR/> bandwidth 1024<BR/> ip address 10.0.1.1 255.255.255.0<BR/> duplex auto<BR/> speed auto<BR/> mpls traffic-eng tunnels<BR/> mpls ip<BR/> ip rsvp bandwidth 1024 1024<BR/>!<BR/>interface FastEthernet2/1<BR/> description Connection to Client1<BR/> bandwidth 5000<BR/> ip address 10.0.7.2 255.255.255.0<BR/> duplex auto<BR/> speed auto<BR/> mpls ip<BR/> service-policy input mpls-exp<BR/>!<BR/>router ospf 100<BR/> mpls traffic-eng router-id Loopback0<BR/> mpls traffic-eng area 0<BR/> log-adjacency-changes<BR/> network 10.0.0.0 0.0.0.255 area 0<BR/> network 10.0.1.0 0.0.0.255 area 0<BR/> network 10.0.2.0 0.0.0.255 area 0<BR/> network 10.0.3.0 0.0.0.255 area 0<BR/> network 10.0.7.0 0.0.0.255 area 0<BR/> network 192.168.153.0 0.0.0.255 area 0<BR/>!<BR/>ip forward-protocol nd<BR/>no ip http server<BR/>no ip http secure-server<BR/>!<BR/>!<BR/>!<BR/>logging alarm informational<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>control-plane<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>!<BR/>gatekeeper<BR/> shutdown<BR/>!<BR/>!<BR/>line con 0<BR/> stopbits 1<BR/>line aux 0<BR/> stopbits 1<BR/>line vty 0 4<BR/> login<BR/>!<BR/>end<BR/><BR/>as you can see i have used policies to map traffic using packet size to dscp and dscp to mpls exp.<BR/><BR/><BR/>any help will be greatly appreciated.<BR/><BR/>Regards,<BR/>MunderAnonymousnoreply@blogger.comtag:blogger.com,1999:blog-1200580631182730878.post-58003714511492457252009-02-22T03:52:00.000+08:002009-02-22T03:52:00.000+08:00Thx a lot masta~Keep on posting...it helps me bits...Thx a lot masta~<BR/><BR/>Keep on posting...it helps me bits by bits..<BR/><BR/>~ aca ~Anonymousnoreply@blogger.com